Home > Knowledge > Content
Products Categories
Contact Us
Hangzhou Klassic Sanitary Ware Co.,Ltd
Contact:Silence Zhu
ADD:No.5-8,Huijin Square, Guali Town, Xiaoshan District,Hangzhou, Zhejiang China
How to install the bathroom mirror
Apr 18, 2018

The bathroom mirror with fog proof is usually made with chemical antifogging agent. The effect is limited by time. The mirror has the same anti fog as the car glass fogs.

It needs wind blowing. The real antifogging mirror has heating device behind it, so that the mirror can be heated and vaporize. If it is an ordinary mirror, use a hard soap dipped in the surface of the mirror to wipe the mirror, and then wipe it with a dry cloth, forming a layer of protective film, and can also play the role of temporary anti fog.

If you want to shine beautifully, you must have good lighting coordination, lights on the front or side mirrors.

Installation, you can use expansion bolts, when punching attention to the variety of tile, if it is all porcelain to use a drill, a little bit by bit, otherwise, it is very easy to crack. If glass glue is used, do not use acid glass glue, should choose neutral glue, acid glass gum will usually react with the material on the back of the mirror, causing specular mottling. Before coating, it is best to do a solubility test to see if the glue is compatible with the material, and the best effect is to use the special mirror glue.

In the bathroom, it is usually standing in the mirror, the bathroom mirror below the ground should be at least 135 centimeters. If the height gap between the family members is relatively large, you can adjust it up and down again. Try to keep the human face in the middle of the mirror, so that the imaging effect is better. It is best to choose the frameless style, because the bathroom is often in damp state, and the material such as wood and leather is easy to change.

Related Industry Knowledge